Hidden Image
Back to All Programs

Clean Heat for All: Room Heat Pump Program

 

Modernizing New York State's existing buildings requires innovative solutions and the ability to scale the adoption of clean, energy efficient technologies. Room heat pumps offer a practical pathway to upgrade thousands of multifamily buildings across New York.

Through strategic partnerships with manufacturers and building owners, NYSERDA is accelerating the development and deployment of these technologies while collecting critical performance data to build market confidence and drive widespread adoption.

Connect with Qualified Manufacturers

Want to stay connected on all the latest updates, information and news about the Room Heat Pump Program?

Join Our Email List

Key Program Benefits

NYSERDA is investing in product development and field demonstrations to ensure room heat pumps perform reliably in New York's diverse climate.

Product development. NYSERDA has vetted and collaborated with room heat pump manufacturers to identify products that have been developed to meet New York building owner’s rigorous performance and quality standards.

Field demonstrations and real-world performance data collection. Once a product is ready, NYSERDA is connecting building owners with these qualified manufacturers to host subsidized field demonstrations that include collecting real-world performance data.

Third-party testing. NYSERDA is collaborating with the Syracuse University Center of Excellence in Environmental and Energy Systems (SyracuseCoE) to test the qualified room heat pump products to better understand the true, seasonal cost of operation in New York’s climate conditions.

Program Offerings for Multifamily Building Owners

NYSERDA provides funding to lower the cost of installing room heat pumps for New York State multifamily building owners.

Window Heat Pump Field Demonstration Incentives
$2,250 per window heat pump installed in low- to moderate-income dwellings.
$1,500 per window heat pump installed in market-rate dwellings.
Incentives are capped at 100% of total project cost (material cost + installation cost, and the total project incentive cap is $500,000.
Through-Wall Heat Pump Field Demonstration Incentives
Up to $20,000 per apartment for through-wall heat pump installation and demonstration.
Capped at 100% of total project cost (material cost, installation cost, building make-ready work)

Why Choose Room Heat Pumps?

Room heat pumps have the following advantages over other multifamily heating and cooling solutions:

Is Your Building a Good Fit for Room Heat Pumps?

The table below shows the ideal building characteristics for room heat pump retrofits, but it’s also a good idea to explore a more detailed comparison Link opens in new window - close new window to return to this page. of the applicability of room heat pumps vs. Other heat pump systems.

Window Heat Pumps Through-Wall Heat Pumps
Existing Heating System
Electric Resistance Good fit Good fit
Oil Fired Boiler Good fit Good fit
Gas Fired Boiler Conditional Recommend evaluation of seasonal operating cost impacts Conditional Recommend evaluation of seasonal operating cost impacts
District Steam Good fit Good fit
Existing Floor Plan
Single or Double-Hung Windows in Living Room and Each Bedroom — at least one window without fire escape obstruction or other façade constraints Good fit
PTAC sleeve in every room Good fit
Metering Type
Master Metered Good fit Good fit
Sub-Metered Good fit Good fit
Direct Metered - Market Rate Good fit Good fit
Direct Metered - LMI Conditional Owner must have a strategy in place to account for heating cost shift to tenant electric bill Conditional Owner must have a strategy in place to account for heating cost shift to tenant electric bill
Size of Retrofit
Full Building Good fit Conditional Current program supports retrofitting approximately 5–10 dwelling units per building.
Partial Building Good fit Good fit

Program Application Steps

Host a Window Heat Pump Demonstration

  1. Confirm your eligibility.
    • You must be seeking to install at least 10 window heat pumps.
    • Your property must be located in New York State.
    • Low-to-moderate income (LMI) sites are required to submit documentation to NYSERDA demonstrating that PWHP installation will not result in net increased housing costs for LMI tenants.
  2. Express your interest.
  3. Partner with a qualified vendor to apply for a field demonstration.
    • Once you have selected a qualified vendor and approved their proposal, the vendor will submit an application for the proposed project.
      • The application requires demonstration site floor plans, project scope and proposal, building owner information, and affordable housing verification documents (if applicable).
      • NYSERDA will accept applications until June 30th , 2027 or until funding is exhausted.
    • NYSERDA will review the application and recommend technical adjustments, as needed. Once approved, the vendor may move forward with installation and commissioning,
      • Please also note:
      • Participants may pursue either a partial or a whole building retrofit.
      • You will not be required to fully decommission or remove your building’s legacy heating system. For the units in which the room heat pump is installed, your legacy heating system must be turned off for a minimum of (30) consecutive days during the peak winter heating period.
      • Monitoring and evaluation will be carried out at select window heat pump demonstration sites.

Host a Through-Wall Heat Pump Demonstration

  1. Confirm your eligibility.
    • Your building must have 5+ dwelling units
    • Low-to-moderate income (LMI) sites are required to submit documentation to NYSERDA demonstrating that PWHP installation will not result in net increased housing costs for LMI tenants.
  2. Express your interest.
    • Multifamily owners that are interested in hosting a field demonstration at a building located in climate zones 5 or 6 [PDF] should respond to RFQL 5937 Link opens in new window - close new window to return to this page. to get qualified.
    • Pre-qualification has closed for buildings located in NYC and Westchester County, if your building is in this region please connect with a qualified through-wall heat pump provider to explore your options.
    • Building owners that submit a response to RFQL 5937 will be notified by NYSERDA if their building is qualified for a field demonstration.
  3. Partner with a qualified vendor to apply for a field demonstration.
    • If you submitted a response to RFQL 5937 and have received confirmation that your building is qualified, reach out to the qualified through-wall heat pump vendors to discuss your specific building needs and develop a field demonstration plan. (See details on NYSERDA-vetted through-wall heat pump product specifications and vendor contact.)
    • Once you have selected a qualified vendor and approved their proposal, the vendor will submit an application for the proposed project.
    • NYSERDA will review the application and recommend technical adjustments, as needed. Once approved, the vendor may move forward with installation and commissioning and will work with NYSERDA on a performance monitoring plan.
    • Please note:
      • To be eligible for Program funding, field demonstrations must be installed by December 31, 2027.
      • Participants may pursue partial or whole building retrofits, but funding will likely allow for retrofits of ~5-15 apartments, depending on how the vendor decides to allocate their incentive funding.
      • You will not be required to fully decommission or remove your building’s legacy heating system. For the units in which the room heat pump is installed, your legacy heating system must be turned off for a minimum of (30) consecutive days during the peak winter heating period.

Qualify a Heat Pump Product (Heat pump manufacturers or vendors)

  • For window heat pump products: You may apply to become a Qualified Participant by demonstrating that your window heat pump product(s) meet the program’s technical specifications, including cold-climate performance, energy efficiency and plug-and-play installation requirements. Learn More Link opens in new window - close new window to return to this page..
  • For through-wall heat pump products: NYSERDA is no longer accepting responses to PON 5937 for qualifying through-wall heat pump products.

What Are Room Heat Pumps?

Room heat pumps are plug-and-play heating and cooling solutions that minimize electrical service or building electrical infrastructure upgrades, which can mean substantial cost savings. Unlike central systems that require extensive ductwork or mini-splits that need ample space for outdoor compressors and refrigerant lines, room heat pumps install directly into existing window or through-wall openings—making them ideal for retrofits to provide both heating and cooling from one piece of equipment.

The Room Heat Pump Program supports two categories of room heat pump products:

Window Heat Pumps

Window heat pumps are designed to replace traditional window air conditioners, transforming cooling-only units into year-round heating and cooling solutions. These innovative products fit standard window openings and offer an accessible entry point for energy efficient retrofits.

Through-Wall Heat Pumps

Through-wall heat pumps are designed for buildings with through-wall sleeves and can provide efficient heating and cooling without major infrastructure changes. They replace existing equipment in three categories:

Category 1

Standard-size Packaged Terminal Air Conditioning (PTAC)

  • Room heat pumps designed to replace PTACs in standard-size wall sleeves, typically measuring 16” high and 42” wide. Standard-size PTACs provide air conditioning and heating, typically through an inefficient electric resistance heating element.
  • Standard-size PTACs are common in multifamily buildings and hotels.

Category 2

PTAC in Hydronic Cabinets

  • Room heat pumps designed to replace PTACs in hydronic heat cabinets. Existing hydronic PTACs provide air conditioning while heating is provided by a central hydronic system. This category of heat pumps will provide both cooling and heating without relying on the central system.
  • Hydronic PTACs are common in post-2000 multifamily buildings, especially in New York City.

Category 3

Through-the-wall Air Conditioning

  • Room heat pumps compatible with through-wall sleeves designed to house through-the-wall air conditioners, providing year-round heating and cooling in a space where traditional through-the-wall ACs provided only cooling.
  • Common in multifamily buildings throughout New York State.

NYSERDA-Vetted Window and Through-Wall Heat Pumps and Vendors

NYSERDA has vetted the following manufacturers through the Room Heat Pump Program for both through-wall and window heat pumps.

Gradient Ai Air Conditioning Corp
(Midea USA) 		Y&N Gree Commercial USA Ephoca Y&N Gree Commercial Ice Air Y&N Gree Commercial USA
Form Saddle Saddle Standard window AC format Category Standard PTAC Standard PTAC PTAC in Hydronic Cab Through-the-wall AC
Dimensions Indoor Unit: 24” H x 25.5” W Indoor Unit: 20.9” H x 25” W Package: 16.5” H x 30.3” W Dimensions 6” H x 42” W 16” H x 42” W 16” H x 42” W 15.75” H x 26” W
Cooling Capacity 9,300 BTU/hr @ 95°F 9,000 BTU/hr @ 95°F 9,300 BTU/hr @ 95°F Cooling Capacity 8,500 BTU/hr @ 95°F 9,000 BTU/hr @ 95°F 9,200 BTU/hr @ 95°F 7,000 BTU/hr @ 95°F
CEER 16.8 17.6 15.1 EER 13.0 @ 95°F 12.0 @ 95°F 12.7 @ 95°F 10.6 @ 95°F
Heating Capacity 9,000 BTU/hr @ 47°F 9,000 BTU/hr @ 17°F 7,200 BTU/hr @ 5°F 9,000 BTU/hr @ 47°F 9,000 BTU/hr @ 17°F 9,000 BTU/hr @ 5°F 9,900 BTU/hr @ 47°F 9,300 BTU/hr @ 17°F Heating Capacity 8,500 BTU/hr @ 47°F 8,500 BTU/hr @ 17°F 8,500 BTU/hr @ 5°F 9,000 BTU/hr @ 47°F ≥ 85% of rated capacity @ 17°F ≥ 75% of rated capacity @ 5°F 10,300 BTU/hr @ 47°F 9,500 BTU/hr @ 17°F 8,300 BTU/hr @ 5°F 7,000 BTU/hr @ 47°F ≥ 85% of rated capacity @ 17°F ≥ 75% of rated capacity @ 5°F
HEER 9.4 11.00 7.7 COP 4.1 @ 47°F 2.7 @ 17°F 2.2 @ 5°F 3.45 @ 47°F 1.85 @ 17°F 1.55 @ 5°F 4.3 @ 47°F 2.7 @ 17°F 2.1 @ 5°F 3.1 @ 47°F 1.75 @ 17°F 1.5 @ 5°F

Through-Wall Heat Pumps

Category 1: Standard-size packaged terminal air conditioning (PTAC)

Room heat pumps designed to replace PTACs in standard-size wall sleeves, typically measuring 16” high and 42” wide.

Category 2: PTAC in hydronic cabinets

Room heat pumps designed to replace PTACs in hydronic heat cabinets. Existing hydronic PTACs provide air conditioning while heating is provided by a central hydronic system. This category of heat pumps will provide both cooling and heating without relying on the central system.

Category 3: Through-the-wall air conditioning

Window Heat Pumps

Connect directly with these qualified vendors to discuss participating in PON 6037 Link opens in new window - close new window to return to this page. and packaged window heat pump solutions for your building:

Frequently Asked Questions

Who submits the application for the window heat pump and through-wall heat pump incentives?

  • The qualified manufacturer is responsible for submitting the application for incentives.
  • However, if requested by the owner, the owner may submit documentation directly to NYSERDA.
  • Please note that the qualified room heat pump providers have decision-making power for their award allocation. This means that not all interested or qualified building owners may receive incentives for their project.

Who is paid the incentive?

  • NYSERDA issues incentive payments directly to the qualified manufacturer. NYSERDA generally expects that any incentive is applied as a point-of-sale discount to the owner.

Is Measurement & Verification (M&V) required for all projects, and who pays it?

  • Window heat pump projects will be evaluated on a case-by-case basis for monitoring, based on owner request and building typology. Through-wall heat pump projects will be required to perform M&V for all installations.
  • NYSERDA will fully fund all M&V activities. Related costs will not draw from awarded incentive totals.
  • NYSERDA, alongside our technical partner will directly perform all work required for M&V. The owner and qualified manufacturer are only responsible for coordinating access to units, as needed.

How involved or impacted are individual tenants expected to be?

  • Typically, most disruption to tenants is expected to be minimal, and limited to providing access to installers, which may take 2-4 hours in each apartment.
  • If a project is selected for M&V;
    • Tenants should expect to be contacted once every 3-6 months for feedback on how the room heat pumps are performing, and to allow access to the apartment for the installation and collection of M&V equipment.
    • Tenants will also be asked to sign a Data Release Authorization Form (DRAF) which allows NYSERDA to access their utility consumption data with the local utility.

Does the entire building need to be retrofit with Room Heat Pumps?

  • No, both full and partial building retrofits are eligible. To be eligible, a minimum of 10 window heat pump units must be installed per window heat pump project, and at least 5 dwelling units must be retrofitted per through-wall heat pump project.

Can an owner self-install with their own contractor?

  • Yes! The installation may be done by the qualified manufacturers selected contractor, the in-house building maintenance team, or the owner’s preferred contractor.

Does the existing heating system need to be decommissioned or removed?

  • No, the existing system may be left in place for emergency back-up. NYSERDA expects that the Room Heat Pumps are used as the primary heating system, defined as the existing heating system being:
    • Turned off for a minimum of (30) consecutive days during the Winter heating period OR
    • Turned off unless the mechanical rooms drop below 38 F, or the apartments drop below 68 F

Program Documents and Resources

You Might Also Be Interested In

Have Questions?

For any additional questions you may have, or for general support and guidance about the Clean Heat for All: Room Heat Pump Program, reach out and our team will be happy to help.

Contact Us