NY.gov Portal State Agency Listing Search all of NY.gov
Print

Research Project Information




Research Project Summary Information



Wind Incentives for Eligible Installers(18344)

Alternative Power Solutions of NY, LLC

Background

In an Order issued in June 2006, the New York State Public Service Commission authorized funding for a Renewable Portfolio Standard (RPS) Customer-Sited Tier (CST) Program through 2009 at $45 million, which allocated 10% of these funds ($4.5 million) to small wind systems. The Order also directed the development of a CST Operating Plan, which through its implementation would, by 12/31/09, encumber 1,800 MWh of annual generation produced by small wind systems, with an associated capacity of 1.8 MW. The CST Operating Plan was approved on February 12, 2007.

Map Error

Project Description

This project supported the installation and monitoring of a wind turbine at a residence in Mexico, Oswego County. A Bergey Excel 10 kW wind turbine was installed on a 140-foot guyed, lattice tower.

Benefits

Wind energy contributes to the public benefit by enhancing the reliability of the grid, reducing peak demand, increasing in-state electricity generation, increasing the diversity of the state’s energy supply portfolio, and making the electric supply market more competitive by promoting consumer choice. This non-polluting source of electric generation reduces New York State's dependence on fossil fuels and helps reduce the emission of greenhouse gases. The operation of on-site wind turbines contributes to the megawatt-hour and megawatt goals identified in the Operating Plan for the RPS CST Program

Project Results

By installing this wind turbine, this residence will produce about 10,837 kWh of clean, renewable electricity every year. It will also reduce the need to purchase electrical energy by 65%. Every $1.00 of NYSERDA funding leveraged $1.24 in additional funding.

Contractor

Alternative Power Solutions of NY, LLC
9483 Shady Pond Drive
Brewerton, NY 13029

Principle Investigator

Owen Pugh

Universities Involved

Technologies

Project Type:

On-site Power Production


Technologies Types:

NYSERDA Contact Information

Mark Mayhew
MSM@nyserda.ny.gov

Program

R&D - Mfg Tech & On-Site Pwr

Contract Details

Start Date: 3/12/2010
Project Status: Active
Contract Number: 18344




Last Updated: 3/13/2013